Home > Windows 7 > Windows 7 Installation Seems To Hang

Windows 7 Installation Seems To Hang

Contents

I'm running Gigabyte 9800GTX 1GB Gigabyte ep45-ud3p intel Q6600 Like most people here it froze with a black screen after the first reboot and always at the same spot. Konuşma metni Etkileşimli konuşma metni yüklenemedi. What unzipping tool are you using? There are so many and I don't want to make a mistake here but stopping something that is essential. this contact form

Yükleniyor... XENON THE FIXER 514.509 görüntüleme 12:21 How to Fix Windows 7 / windows 8 / 10 Start-up Problems - Blackscreen - Bootloop [HD] - Süre: 6:35. I seems Window 7 x64bit ver does'nt like USB to be opperational ,  So I disabled the USB controller in BIOS. sadly, after you hit "start to install" it goes into a seemingly infinite setup is starting cycle where ultimately nothing happens.

Windows 7 Install Stuck At Setup Is Starting

Made it past second load screen and was sent back to BIOS4. Well, it could be worse. Ekle Bu videoyu daha sonra tekrar izlemek mi istiyorsunuz? The others led to the same hang I experienced the first time.

My computer began freezing yesterday morning and i opted to just go straight for a clean install. Did you figure out anything yet?  Thursday, January 22, 2009 1:32 AM Reply | Quote 0 Sign in to vote I am getting the same problem. What gives? Windows 7 Hangs On Starting Windows Screen please help..!

Please re-enable javascript to access full functionality. I rebooted to CMD prompt and ran CHKDSK/f and now it runs great. Sunday, December 27, 2009 12:19 AM Reply | Quote 0 Sign in to vote I had the same problem - Windows 7 freezing at "Completing Installation" and managed to fix it.

Disabling just about everything else in bios 4.

But UEFI came into being after Win7. Windows 7 Fresh Install Stuck At Starting Windows Sunday, January 02, 2011 5:34 AM Reply | Quote 0 Sign in to vote Just a heads-up to everyone, I've seen this so many times on the net I can't believe I think I wasn't clear - this is a brand new home built computer. Kategori Nasıl Yapılır ve Stil Lisans Standart YouTube Lisansı Daha fazla göster Daha az göster Yükleniyor...

  • so far windows 7 seemed to be mroe favorable as it got to the complete installation after successful reboot, but nothign after and repairing doesn't seem to work.
  • Take care out there and GOOD LUCK!
  • Thursday, July 07, 2011 12:09 PM Reply | Quote 0 Sign in to vote Well I found a option for the stalling at "completing installation" stage.
  • You might also want to examine the unattend file there.

Windows 7 Install Hangs At Completing Installation

However, when I boot it, it hangs on the loading part where Microsoft Corporation with a bar on top appears. type SELECT PARTITION 1 9. Windows 7 Install Stuck At Setup Is Starting Proffitt Forum moderator / March 20, 2010 7:44 AM PDT In reply to: After Win 7 Install It appears this is now up to you to figure out what's amiss. Computer Freezes At Starting Windows Screen It installed without problems and I'm running it for 2 weeks.But, there is a little problem: when I'd changed bios settings to over clocking profile 15% on start-up windows hangs before

type SELECT DISK # where # represents the number of your USB drive. weblink I gave up and returned to windows xp pro. I tried just about everything under the sun in BIOS settings, startup options, PS/2 keyboard w/ no mouse, etc. x64 CPU Intel i7 860 @ 2.80 GHz O/C'ed to 4.0GHz Motherboard Gigabyte P55A-UD3R Rev.1. Windows 7 Install Freezes After Loading Files

I was running fine on Windows 7, and all I did was a reboot and my machine would not boot. If you DO NOT know which driver is causing the problem AND you CANNOT see an obvious driver with a YELLOW TRIANGLE or EXCLAMATION POINT in Device Manager then try disabling all of the things you see listed above, but in the end I had to find standard DDR400 PC-3200 RAM to perform the install and, once completed, I was able to navigate here Flag Permalink This was helpful (0) Back to Windows 7 forum 10 total posts Popular Forums icon Computer Help 51,912 discussions icon Computer Newbies 10,498 discussions icon Laptops 20,411 discussions icon

Remember - remove every peripheral possible before installing. Windows 7 Install Hangs At Language Selection Award BIOS F13 Memory 16GB Corsair Vengance DDR3 @ 661 MHz Dual Channel (9-9-9-24) Graphics Card EVGA NVidia GTX 560 1024MB Sound Card Realtek Integrated Monitor(s) Displays Dual Samsung SyncMaster 2494HS Get this right or you will wipe a different drive out. 6.

Windows 7 managed to install with the old video card in but when the 9800gtx was replaced the black screen returned and would not boot up (always stopped just after the

Windows 7 Help Forums Windows 7 help and support Installation & Setup » User Name Remember Me? Thursday, April 09, 2009 3:39 PM Reply | Quote 0 Sign in to vote I have no expansion cards in my computer.   It's as it came from the factory. How to install Windows 64 bit on a uEFI/BIOS firmware: UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with or UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with Windows 7 Stuck On Starting Windows Fix Read the latest ones with command type | more See if you can figure out what the installation process was doing the last time before it got stuck.

and my bios doesnt allow me enable AHCI in bios! Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. I have Home Premium, 64 Bit, Dell XPS, Intel i7, 6BG of memory. his comment is here Tuesday, August 03, 2010 6:41 PM Reply | Quote 0 Sign in to vote Hello everyone.

So if you had first created a Win7 clean installation, then created a separate partition for 8.1, it would automatically 'make room for' Win7, give it a key, and let you Kapat Evet, kalsın. This is as much as I know to help, sorry! Saturday, October 23, 2010 12:50 PM Reply | Quote 0 Sign in to vote USB seems to be the trick, I had a newish microsoft (??)mouse caused problems.

Just reinstall from beginning several times. No luck! Step 7: Once you have disable all of your drivers. I then removed VGA (D-Sub) and connected DVI.

Through the process of trial and error, you can deduce which one(s) is/are causing the problem. i started thinking why and it came to my attention that the most unique thing about my desktop is i have dual video cards running in it and a tv capture Miscellaneous 10.164 görüntüleme 2:39 Os is nt installed. SO IF ANYONE IS HAVING A PROBLEM INSTALLING WIN7 TRY DISABLING USB CONTROLLER!!   Tuesday, October 20, 2009 12:46 AM Reply | Quote 0 Sign in to vote I tried to

The keyboard has a screen built into it and it has to be plugged into an outlet to make it fully functional. Daha fazla göster Dil: Türkçe İçerik konumu: Türkiye Kısıtlı Mod Kapalı Geçmiş Yardım Yükleniyor... But I can say that I also had to try different guides. Installed these in safe mode and it is now working beautifully.

Sunday, November 01, 2009 5:26 PM Reply | Quote 0 Sign in to vote well lol, after moving my hardrive to another computer and installing it their, finally worked, then once I'm using all the components of the December 2009 $1,300 build. So when in RAID 0 I get one 225 GB drive. You can change this preference below.

TURN ON AHCI . SHOW ME NOW CNET © CBS Interactive Inc.  /  All Rights Reserved. Have a look at setuperr.log and setupact.log files there. - Ransu How do you hit shift-F10 when the installation completely hangs up the computer?? Oturum aç 503 75 Bu videoyu beğenmediniz mi?