Home > Windows 7 > Transferring HDD From AS Rock Mobo PC To Dell PC - Will Not Boot.

Transferring HDD From AS Rock Mobo PC To Dell PC - Will Not Boot.

Contents

Remove the computer cover. This fact is usually accepted by the user, who then reinstalls the OS and all applications and transfers user profiles from a backup location. I told the lady on the phone that I needed to replace the mobo she activated it lol. If you have a retail copy (or "full version") of Windows, you'll only need to re-input your activation key. navigate here

I ran a diagnostic test where you plug in each component to the power supply 1 at a time. The partition which saves Windows boot files is no longer active or users set wrong partition active. Happy computing! Can't find your answer ?

Move Windows 7 To New Computer Without Reinstall

It can work, but since Microsoft doesn't support this, there are many things things could go wrong if you try to do this at home. Step 7: Press F10 to save changes and exit. And the following 5 solutions are introduced in this order. A CD writer and a blank CD or a thumb drive or a USB hard disk Your Windows 7 install disc if you already tried the system repair option, or the

  1. Reconnect the battery using one of the following methods: Insert the battery back into the horizontal or vertical connector, orienting the " " and "-" correctly.
  2. http://www.tomshardware.com/forum/327661-30-asus-m5a99xhttp://forums.bit-tech.net/showthread.php?t=216567Here are two.
  3. Well then, how can we fix or rebuild MBR without loading system?
  4. JDPCApr 7, 2014, 10:36 PM I can't see any thermal paste overflowing but will look more tomorrow Nathan WillisApr 7, 2014, 11:33 PM tiny voices said: Nathan Willis said: Yes, the
  5. It transfers heat but no where near as efficiently as metal.
  6. This is not necessarily the case.
  7. An organization might use this method to deploy a Windows image with various settings and software installed on all its PCs, or a computer manufacturer might use this trick to install

It is actually VERY hard to find RAM that is not compatible. If a wrong partition is set active, naturally operating system cannot be found. If one or some of these resolutions are proved to be useful for you, please share this post to others who have similar troubles. "These five solutions to Missing Operating System Adding Old Hard Drive To New Computer For detailed steps, please see Rebuild MBR.

Read More JDPCApr 7, 2014, 4:23 PM All the fans are spinning fine. Users make improper or incorrect BIOS settings. 4. Safari Chrome IE Firefox Support Navigation Support Support Support Home Intel® Boards and Kits Desktop Boards Computer Does Not Boot After BIOS Update for Intel® Desktop Boards Last Reviewed: 29-Nov-2016 Article Published 01/25/16 DID YOU KNOW?The aptly named bloodwood tree "bleeds" a dark red sap when the bark is cut and it pools and coagulates over bark damage much like human blood

Get PCMover and Setup Your New PC the Easy Way The Technical Problem: Device Drivers RELATED ARTICLE8 Backup Tools Explained for Windows 7 and 8 If you actually try moving a How To Transfer Windows 7 To Another Computer This will de-activate Windows, and you'll have to go through the Windows activation process again after doing so. If you do not know how to use your diagnostic tool, please view your computer or motherboard manufacturer's website to find specific operations. Held the power button for 1 min. 3.

Transfer Windows 7 License To New Computer

But because of differences between traditional BIOS and UEFI BIOS, this method will talk about how to set USB drive as first boot device in BIOS Setup in two parts. Tips: Boot Menu may show your USB drive as USB HDD or other name. Move Windows 7 To New Computer Without Reinstall If the battery is in a horizontal or vertical battery holder, using a medium flat-bladed screwdriver, gently pry the battery free from its connector. Move Hard Drive To New Computer Windows 7 For new computers pre-installed with Windows 8/10: Step 1: Start computer (Eg.

That is just marketing BS they put on the box. check over here Press Enter. You may see an error about problems with the "hardware abstraction layer" or "hal.dll", or it may even blue-screen during the boot process. many thanks!!!! How To Copy Windows 7 From One Computer To Another

If NOT, they can set the wrong partition inactive and mark the right partition active. Then, check whether the correct partition is set active. It's designed for large organizations and PC manufacturers, giving them a way to create a Windows image and then duplicate, or deploy, it on a variety of different PCs. his comment is here HP F12, Esc Press Esc, then F9 for Boot Menu.

RELATED ARTICLESHow to Recover Files From a Dead ComputerHow to Convert a Physical Windows or Linux PC to a Virtual Machine Windows really isn't designed to be moved between hardware without a Moving Hard Drive To New Computer Windows 10 Follow @howtogeek More Articles You Might Like ABOUT About Us Contact Us Discussion Forum Advertising Privacy Policy GET ARTICLES BY EMAIL Enter your email address to get our daily newsletter. Replace the computer cover.

JDPCApr 7, 2014, 10:07 PM Faulty mobo or faulty CPU/bent pin...?

The one that makes the light blink is bad. Report Alan- Oct 15, 2014 at 08:00 PM Same problem .. Tip: Since steps to fix MBR by using Windows repair disk are nearly the same as those by using installation disk, here we don't introduce this program. Change Motherboard Without Reinstalling Windows 7 OP, your RAM is 2.5v DDR3 RAM.

Asus M5A99FX Pro R2.0 solved PC HDD light is red and it doesn't boot up. The RAM is ddr3, it's only 1600mhz and the timing is the same as other compatible ram..... ModernWarfareApr 7, 2014, 9:34 PM have you taken out all cables from the mobo and replug them with pressure? weblink It works every time, with one exception: for reasons unknown to me, sysprep seems sometimes dislike Windows Media Player networking service, which is by default started every time Windows 7 starts.

Restart PC,but it doesnt boot and the motherboard lights up a red led PC won't boot, red CPU LED lights up. Enter Boot option tab, and go to Boot device Priority item. Insert USB memory stick to Acer laptop and start or restart Acer laptop. Find the battery on the board and remove it.

But sometimes the target hard disk is still invisible even though we have done reconnection, and there are 2 possible reasons: the interface for the drive is forbidden; or the hard Sysprep generalizes now your Windows 7 setup and shuts down your computer. Plug the battery wires back into the onboard connector. it requires a bit more tweaking, isn't guaranteed to work, and generally isn't supported by Microsoft.

If the exact configuration of that Windows system is so important to you, you might want to consider converting the Windows installation on that computer to a virtual machine image, allowing Same thing when buying a new computer with completely different hardware setup compared to the old one, or trying to restore a system image to different hardware setup. The problem is solved Helpful +14 Report Melly Sep 3, 2014 at 08:14 AM I would never have tried that lol, I was pretty much ready to throw the old girl Get downloadable ebooks for free!

You might note in the tutorial that if on first booting Windows can't finish configuring, a reboot into safe mode, then a normal reboot will allow it to finish successfully. Windows Updates & Activation Transfer Windows 7 to New ComputerHi, How would you transfer complete Windows 7 Home Premium 32 Bit installation from old computer with PATA HDD to New computer Get the answer cburke82May 6, 2014, 9:22 PM mbreslin1954 said: Legally you cannot use the OEM copy of Windows that ships with any major computer manufacturer, such as Dell. Insert USB memory stick to computer and start or restart HP computer.

Because your old user profiles already exist, Windows does not accept your normal username, but instead you have to create a new temporary user. You can extract individual files from a system image backup, but it's not quite as easy. If the battery is connected to an onboard connector by wires, disconnect the battery wire from the connector. Report Joe- May 12, 2013 at 04:34 PM I have no idea why this worked for me, but it did.