Home > Windows 7 > Moving HD/Win 7 Install After MOBO Failure

Moving HD/Win 7 Install After MOBO Failure

Contents

I changed motherboard and had to reinstall win. At the time my machine was almost 4 years old. Once you're done installing everything on the driver disc, you'll notice that your new motherboard installation won't affect your Windows startup as much because the computer won't be overwhelmed with a by progan01 / August 29, 2014 9:47 AM PDT In reply to: How do you migrate data and programs from a dead PC to a new one? Check This Out

by snavelyz / September 7, 2014 7:33 AM PDT In reply to: PCMover Dear CNET andyguever: have an old XP , ( still working), but like to upgrade to W-8.1, but Do not run any other programs during this phase. Microchips made from DNA has exiting prospects. Flag Permalink This was helpful (5) Collapse - Not as easy as it should be by ilkaplan / August 29, 2014 10:58 AM PDT In reply to: How do you migrate

Windows 7 Won't Boot After Motherboard Replacement

Turn on the new PC, enter "Setup" just to make sure the drives are recognized by the PC, Save and Exit the Setup program, and let the machine boot. I know it won't work on older O/S than Vista because I have also tried that in the past, but it seems to work with the newer O/S. You can then use your old account, delete the new one in Control Panel > User Accounts and add any drivers that are required (such as GPU, motherboard, etc.) Well done Windows 7 hasn't been around that long so her computer must have a decent spec.

But if I can fix this without a clean install that would be preferable) 31 answers Last reply Jan 24, 2016 More about windows boot motherboard bios alvineMay 10, 2012, 11:27 transfer all the data from the old HD to the new machine, you'll need a housing and USB connection to do this, but Windows has a decent enough migration product to CallumCJMay 11, 2012, 12:31 AM Yea it failed on activation, will go down the phone option. Paragon Adaptive Restore 2010 I shouldn't have missed that I feel rather stupid, anyway thanks.

Reply Costel Balaita July 1, 2015 at 7:53 am I used sysprep.exe just as described in the article (switched MB with AMD CPU to MB with Intel CPU). Please try again now or at a later time. But will be going for a fresh install in 2 months. Best regards.

Jan 27, 2012 at 12:24 pm Anonymous saysYes it will. Change Motherboard Without Reinstalling Windows 10 Flag Permalink This was helpful (0) Collapse - Only If The Drives are the Same Type by Hforman / August 30, 2014 11:48 AM PDT In reply to: Dana... Jul 16, 2012 at 6:06 am bob saysi have a copy of windows xp pro 32bit .if i under stand this right i can transfer my copy of xp to my I used the recommendation to change SATA type to IDE rather than AHCI and on the next boot it started Win 7.

  • He can take the drive(s) out of the old and install them into the new as additional auxiliary drives.
  • Then wait as it will take a while for windows to churn through the changes and get to your desktop.
  • Then moved hdd back to old pc and that won't boot , can't even boot into safe mode.
  • Not the answer you're looking for?
  • Btw, I have disabled the "Windows Media Player Network Sharing Service" cause the sysprep was failing and had to disable this to complete the sysprep.
  • Whichever OS you choose, all of your data will be accessible.

Change Motherboard Without Reinstalling Windows 7

You've installed Windows in Boot Camp on a Mac and you want to move your Windows installation to another Mac. PATA? Windows 7 Won't Boot After Motherboard Replacement Some backup software will restore to different hardware. New Motherboard Startup Repair Thank you.

Tried 5 times till now. his comment is here A new C: drive was installed with the new mobo and a new build of the OS put on that. Always Allowed: Replacing a Motherboard Because It's Broken You can upgrade a lot of hardware components without Windows freaking out, including the graphics card, RAM, and hard drive. if you had Office 2007 on you XP machine it'd give a green tick and does in fact move it accross simply and gets it to work very successfully. New Motherboard Windows 10 Won't Boot

OF course, if you get the BSOD and an immediate restart, go ahead with the Dowd&Assoc. I got on the Internet and searched for every data retrieval article I could find. I've tried the repair option and it doesn't work.I've tried disabling and enabling various options in the BIOS. this contact form What size drive?

If this fails, then sorry you will still have to go purchase a retail copy of win 7 to use or you stick to your old machine, flesh and bone!!! Move Windows 7 To New Computer Without Reinstall Most people will purchase a computer with a Windows license preinstalled. After having a look around online the only answers I can come up with would be that I need to run the boot up from the Windows 7 dvd and then

That's a lot harder to do, and it's usually better to just perform a fresh install on the new computer if that's what you need.

article AFTER you change the BIOS back to the original setting. Reply HLJonnalagadda September 23, 2012 at 9:33 am Never had to change out a mobo before, but with Windows being what it is, the knowledge might come in handy later. in the UK HMRC (government tax office) program which is obligatory for financial reports to them, has different versions for XP and Win7+, so needs a download and installation but will Msi Motherboard Driver Downloads The sysprep didn't work at first but when i looked at the error log I discovered that you can't run sysprep (in win 10 anyway) on an upgrade OS.

It’s also worth removing any premium Adobe software that you have installed, as these will probably fail to work on a new motherboard without reinstallation. You will get the following error: "Sysprep cannot run on a computer that has been upgraded to a new version of Windows. What if I take the drive out, put it in a bay in another computer and wipe the OS that way. http://gagc.net/windows-7/windows-7-ultimate-64-bit-install-failure.php May you live forever, Dave!

EDIT 1: Cleaner method to transfer hard drive to new hardware Open an elevated command prompt and type: %windir%\System32\Sysprep\Sysprep.exe and hit Enter In sysprep dialog that opens, choose System Cleanup Action I just did this yesterday to go from a dead XP to 8.1. Reply Tony September 20, 2012 at 12:29 am What about changing the hard srive controller driver to the generic version? The truth is that the result normally depends on what type of Windows installation you have; namely, whether you have an OEM or retail version.

Someday this will be laughed at hilariously, that a mere software company in Washington once held sway over millions by means of extortion it used on PC manufacturers. Please reply as I need a definitive answer on this. Transferring the data is really not much of a problem and you would simply copy your Documents, photos, video and music files from the old drive to the new drive using Most programs will need to be reinstalled from the original CD's or installation files, however some programs such as Microsoft Office may be licensed for the original computer ONLY and may

After they’ve finished downloading, you need to extract them to a folder. Flag Permalink This was helpful (2) Collapse - Use Multiple External Hard Drives For Backup by stbernard1973 / September 5, 2014 1:38 PM PDT In reply to: Big external drives fail Among those that work best are:XXCloneParagon Hard Disk ManagerThere are many others, including Acronis Trueimage, Easeus ToDo Backup, Shadow Copy Cloner, O&O Diskimage, etc.Or you can do a new install of However, Microsoft should allow you to reactivate Windows 10 on a PC if you had to replace the motherboard because it was broken.

With all due respect I am not saying that it is impossible. Happily, no problems with the new license - activated in seconds. I haven'tchecked the part number for the disk yet, but I guess it could be somekinda upgrade DVD, but I thought m$ did away with that a while ago.Anyway, I'd like Join thousands of tech enthusiasts and participate.

In this situation you should contact Microsoft who will provide you with an activation code. Flag Permalink This was helpful (0) Collapse - Dead PC by doogermeister / August 29, 2014 10:55 AM PDT In reply to: How do you migrate data and programs from a The bottom line is, if it is an OEM installation it will not work. They just want to make sure you aren't installing the same license on multiple PCs at a time.

Yes, Wydnej you are knobbled. If for some reason your computer has to be replaced with a newer model, the Image backup will not do you much good other than to recover your data only.Note: I Reply bandi November 5, 2016 at 3:44 am it's a useful post. After your product key fails, you can choose to activate via other methods and use Microsoft's automated phone system.