Home > Not Working > Windows Explorer Is Not Responding When I Try To Erase DVD-rw Discs

Windows Explorer Is Not Responding When I Try To Erase DVD-rw Discs


Bookboon.com Shahbaz Amin December 5, 2012 at 1:24 pm Probably cos its still busy? This is most likely NOT a hardware problem at this point. So I dont know what made it on the disc or if they are even complete because opening the disc to check makes Win Explorer act up again. It could be something in the hardware but I kinda doubt it based on the syptoms. http://gagc.net/not-working/mouse-not-responding.php

I always pick a different brand - providing I have tried solving the problem by fully updating the third party program already resident on the machine. Figure : LowerFilters in Registry Editor If an UpperFilters value is also listed, select UpperFilters in the right side of the window and press the Delete key. Step 2: Replacing the PxHelp20 registry value Use the following steps to replace the PxHelp20 registry value: In Windows, search for and open regedit. I think it is irresponsible of Apple not to address this issue once and for all. http://www.sevenforums.com/general-discussion/188312-windows-explorer-not-responding-when-i-try-erase-dvd-rw-discs.html

Cd Rom Not Working

If you can, unistall the ROXIO and either try something else or re-install ROXIO. Both have always been in good working order but one day recently they just were not there! Use these steps to troubleshoot this condition. Nowadays,they appear to have a finite life.

I tried playing a music disk and it wouldn't start. not sure I see how it would have been or could been an MSoft update.VAPCMD Flag Permalink This was helpful (0) Collapse - Time for a new drive? If this was a hardware issue, you would not record ANYTHING on the CD or DVD and the program you are using would ERROR. McFedries is the author of more than 30 computer books that have sold nearly 2 million copies worldwide.

This leaves software as the main possibility. Can't Delete Files from a CD-RW Disc 691 I can't read a particular recordable or rewriteable DVD disc with my DVD drive. Close the Registry Editor and restart the computer. Please refer to our CNET Forums policies for details.

As I right-click on DVD drive icon, my Windows Explorer hangs and when I eject it my Windows Explorer performs well. I have also taken the discs that I have attempted to burn files to and tried opening them on another computer. For more information about IEEE-1394 (Fire/Wire, i.Link), see "IEEE-1394a (FireWire 400) Ports," Chapter 7, and "Troubleshooting IEEE-1394 Ports and Hubs," Chapter 7. ha14 November 30, 2012 at 8:43 pm perhaps because DVD-RW was not finalized, also probably the DVD-RW is corrupted and no more recoverable so windows xp has difficulty to treat it.

  • Took it to MicroCenter and they immediately said it was from a MS update.
  • by Roy Thorogood / October 5, 2012 8:39 PM PDT In reply to: What's causing my CD/DVD burner to suddenly stop working?
  • Sorry, there was a problem flagging this post.
  • Maybe I should try 3P software.
  • Book your tickets now and visit Synology.
  • Proffitt Forum moderator / October 27, 2012 4:08 AM PDT In reply to: CD and DVD players While a good question, I suggest you start your own discussion if ideas here

Cd Drive Not Working Windows 7

A new LowerFilters value containing PxHelp20 is listed in the Registry Editor window. http://wiki-errors.com/cd-rom-not-responding/ my burner hasn't worked right for a few weeks, and i kept looking for solutions. Cd Rom Not Working Table 3.2 179 I keep having buffer underruns with my rewritable CD or DVD drive. Figure : New Multi-String Value Replace the default text for the new value by typing the following and then pressing Enter: LowerFilters Right-click the new LowerFilters value and select modify.

A copy of the registry has saved for back-up purposes to the Documents folder. http://gagc.net/not-working/problem-with-some-keys-not-responding-on-keyboard.php If the CD/DVD drive is not original equipment and was recently added, make sure that the drive cables are installed correctly. See that the drive installs correctly. HP PCs - CD/DVD Drive Is Not Detected (Windows 10, 8) This document applies to HP and Compaq computers with Windows10 or 8.

ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: Connection to failed. Does Roxio have a log? Could the 1k files just be the short cut to the real songs instead of the actual files? have a peek here do this!

With... It likely interferes with Apple's hegemony (or monopoly) take your pick. To correct the problem and allow the software to detect the drive again, uninstall the CD/DVD recording software, restart the computer, reinstall the disc recording software, then restart the computer again.

Uninstall CyberLink Power2Go from Programs and Features: In Windows, search for and open Programs and Features.

Table 3.2 179 I'm not sure how to jumper my ATA/IDE drives. Troubleshooting CD-R and CD-RW Drives and Media 686 I can't read recordable (CD-R) media in the target drive. The time now is 18:04. .

CD-ROM Not Responding When your computer has a CD-ROM Not Responding problem it means you can’t run programs that Restart computer and try again?

Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. alanrwood Speed is not the issue I believe since any burning software wont even recognise the DVD-R to start burning. This is especially tricky on blu-ray, but some DVDs are IAA compliant also. Check This Out Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

The drives are reasonably priced so I just need to find the time to take care of it. No I'm not using 3rd party software, just windows explorer. There are a lot of good things to try before he runs out and buys a new burner (I'm going to try one or too on one of buy burners as Z7_3054ICK0KGTE30AQO5O3KA3015 hp-online-communities-portlet Actions ${title} Loading...

note: Those familiar with editing the Windows registry can save time by adding a LowerFilters value to the Windows Registry instead of reinstalling the software. Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears. So for years I have always just taken one day to put all of my published/finalized videos onto discs. Type the following into the Value Data field: PxHelp20 Click OK.

Do the following depending on what is shown in the Device Status section: If error code 10, 19, 31, 32, 39 or 41 is shown in Device Status, a problem exists I avoid Microsoft site like the plague - they don't speak English at Microsoft - it is some kind of alien language totally devoid of intuitive thinking! Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. problem.

A virus is a possibility. If you are using a notebook computer, go to HP Customer Support -Contact for further assistance. Windows explorer (not responding error) is in a malfunction loop. note: The name for the software reinstallation option may vary between computers.

What's New? About Wiki-Errors Contact us Help Center Privacy Policy Terms of use End User License Agreement(EULA) Refund Policy How to Uninstall Disclaimers Sitemap PC Advisor Phones Smartphone reviews Best smartphones Smartphone tips Use the following steps: Go to HP Customer Support (in English), click the Support tab, click Drivers & Downloads, then select your product category. If it was hardware, he wouldn't be able to burn anything at all or each CD would be different.

If the screen comes on but the system never displays any activity from the hard disk, your system (boot) hard disk isn't working. I think what you want is firmware but I found nothing on that either. Submitted by Roy T. If you are trying to copy material that is copyrighted, the originals may have some copyright protection that will interact with the protection in your software.