Home > Hard Drive > Windows Boot Stalls When Adding Additional Sata Drives

Windows Boot Stalls When Adding Additional Sata Drives


Boot Priority Sequence - It should be optical first, the old 60 GB drive second, and NO mention of the new 500 GB unit that does not have a OS installed Report • Start a discussion Ask Your QuestionEnter more details...Thousands of users waiting to help!Ask now Weekly Poll Do you think Monopoly should update its pieces? Everything in BIOS was good. Reply Glenn says: November 7, 2007 at 2:59 amSteve - if all is connected then u must format - see above under ‘Software Installation/Cloning'I've just added a second and had no http://gagc.net/hard-drive/adding-old-sata-hard-drive-to-new-computer.php

Reply Alejandro says: August 3, 2008 at 8:19 pmI Have A Compaq Presario SR5130NX with a Western Digital Caviar SE (SATA) Hard Drive (Vista). I am thinking that my computer is attempting to start the drive, but eventually fails (even though BIOS recognized it beforehand) and then starts Knoppix and the drive just isn't there.I bobowycDec 27, 2014, 11:06 AM @techfail, check your PSU power. How is the SATA drive setup in the BIOS?

Windows Won't Boot With Second Hard Drive

After a few weeks, i switched on my pc when i got home, and my pc was in BIOS screen for a good 2minutes+. Boot up again and go directly into BIOS Setup and to Boot Priority Sequence. It seems to be identified almost immediately. –Journeyman Geek♦ Sep 21 '11 at 2:41 Then I am not clear on what is happening.

In addition to the normal boot order where you select hard drive, there is a second option in a later screen that you select WHICH hard drive to boot to first. This Inrush current could trigger the PSU to shut down. "Good" PSU with 500 Watts would be NO Problem for your system. Win XP and Linux. Installed A New Hard Drive Now Computer Won't Turn On Setup shows the 250GB drive for device "0" 2.

In Gsmartcontrol, the drive shows a lot of prefailure or old age (well, all flags are one or the other) related flags. Installed New Hard Drive Windows Won't Boot Problem arises when the system is running the operating system boots. From this point I have once had Windows work sucessfully but when powered down completely the machine reverted to not seeing the hard drive in bios and only the two dvd TX Reply thenson says: August 14, 2007 at 9:51 pmI was told that I fried my mother board from a local docal {dumb corner guy) 2nd hand computor store.

I have changed the jumpers to master. Windows 7 Won't Boot With Second Hard Drive Set the jumper on the HDD to be Master.2. Reply Cliff says: December 11, 2008 at 3:23 pmDave, Thank you for taking the time and making the effort to publish these instructions. joluk44Apr 30, 2013, 11:38 AM it also had the option to read sata drives as native or legacy, and is currently set to native Best answer PaperdocApr 30, 2013, 4:32 PM

Installed New Hard Drive Windows Won't Boot

My computer - "C" drive properties still shows the 90GBI am running XP. - Sytem came right up and looks OKHow do I get "My Computer" to recognize the 250 GB. As long as your mobo supports both IDE and SATA and still has a connection for each, then you're fine. Windows Won't Boot With Second Hard Drive Reply Ron. Computer Won't Power On With Hard Drive Plugged In If you don't want to reinstall Windows, you can clone the contents of your old hard drive to your new one using the setup utilities that hard drive manufacturers provide, or

Reply James Scholes says: June 23, 2009 at 2:47 pmHi, I have a drive mounted in an external enclosure, on which the power supply has gone dead. http://gagc.net/hard-drive/system-windows-files-scattered-around-2-drives-on-windows-7.php I'm running 4 IDE/ATAPI devices (160GB HD, 80GB HD, CD-RW Drive, and a DVD/CD-RW Drive) on my IDE controllers. There are a few additional considerations to take into account if you are running multiple SATA drives in a RAID array (like making sure all OS's are installed with RAID drivers) Thanks a lot! Installed New Hard Drive And It Wont Boot

For example, I'm assuming it should boot from the SSD and that's where your OS is located, but if the HDD is set at a higher priority and is connected, it Can't find your answer ? Well worth the investment. http://gagc.net/hard-drive/win-7-doesn-t-see-my-other-sata-drives.php so im following the steps to format it.

solved new hdd stops boot solved HDD stops pc from booting solved win 7 during boot, computer stops 3 seconds then reboots solved Second HDD preventing win 10 boot Can't Boot Windows Won't Boot Without Second Hard Drive Reply travis gibbs says: December 22, 2009 at 3:23 amok i have a old computer may me 4 years or more. This should probably be set to "IDE Emulation".

Then, I plugged the two required cables: the SATA ATA cable (from a free slot in the motherboard to the drive) and the SATA power cable.

there is power gettingto the drive and the conections are secure. Ready to use, my system boot by HD SATA and use HD IDE as swap and backup drives.It's all.[]sClaudioPS: sorry because my english is short compreensive (= poor) but i try Live in Moscow Russia now. You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit Following your instructions, I have now successfully added a Samsung hard drive and Windows XP has recognised the primary slave.

Can u please guide me/help me to install the new system. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. Reply Grail says: January 20, 2009 at 12:54 pmthis guide is … what can I say? http://gagc.net/hard-drive/flash-drives-and-external-hard-drives.php I believe this is a ATA-6 model.

One day when I turned my computer on, it just wouldn't boot with my HDD attached but it boots with my SSD attached alone. First shut the machine down. Improve speed at all? I'm familiar with computers but this is the first dual setup I have seen.

It is up and running but now my computer does not recognize my second drive. If you go with the external and the problem drive quits you can repeat a necessary.Use copy instead of cut. I was told by computer support group that I can only assign a letter once I installed the startup disk (which unfortunatley I couldn't find). Get the answer scout_03Sep 30, 2012, 10:02 AM try the system with the second drive only to see if you get a post and find if there is a os on

Recuva runs under windows. Heck, I've even had to go to Wikipedia to understand what SATA is!Great website! Reply Nick says: August 22, 2009 at 4:15 amawesome. It didn't fix the issue, but it did help me narrow things down the slightest bit.I just tried a Knoppix live CD with testdisk at your recommendation, but it doesn't recognize

Your mobo sounds similiar to mine. I'll be having a SATA later on for my slave drive. What are the pro's and con's of cloning the old drive versus a Windows reinstall? Then, after paying $70 bucks he restored it (with all files gone) he told me I had a virus and not to download free music anymore and always update my security

Report • #5 OtheHill March 28, 2011 at 21:30:33 Newer boards have so many drive connectors that the BIOS options had to be expanded. I desperately need the information, so reformatting is not an option at this point.