Home > Hard Drive > Upgrading To 4K (Advanced Format) Hard Drive (Windows Update Problem)

Upgrading To 4K (Advanced Format) Hard Drive (Windows Update Problem)


This would be a vicious circle! So I started removing the X201 drivers and installing the X200 drivers, etc etc…then suddenly windows update stopped working again. Select the Operating System from the Operating System: dropdown box. I just bought a usb3.0 320gb external hard drive the brand and model are: "Imation Apollo M100" I plugged it into a usb 3 port and it worked but I wanted this content

Apply Microsoft KB Article: 982018. I can't figure out which file to install. Users can resolve errors encountered when attempting to extend a partition in the Windows XP mini-setup by modifying the ExtendOemPartition key in the Sysprep.inf. This machine is a refurbished laptop so no system discs of any sort--and none available I found out yesterday!

Windows Update Not Working After Cloning Hard Drive

From the readme: … 8.1a Systems Configured for RAID Mode: … 8.1b Systems Configured for AHCI Mode: … Reply Dave says: 2015/06/25 at 1:15 pm I've tried the latest version (SetupRST.exe) And here we are - same errors again. Please try the request again. What Happens if I Run a Partition Alignment Tool (Such as the Paragon Alignment Tool) on a Drive That is Already Aligned?

  • Reply ren says: 2015/04/18 at 5:30 am Thanks to all for their help.
  • I have 2 identical ST9750420AS drives.
  • However, Win 7 did boot partly.
  • Reply Don Gateley says: 2013/02/08 at 6:35 am Infinite thanks.
  • Don't waste your time, just clone your disk, run an align tool and install the right driver following the guides above.
  • Help Desk » Inventory » Monitor » Community » Seagate  ␡ Sign In as Consumers & Non-SPP Resellers Partners & Suppliers ␡ My Dashboard My Profile Logout ␡ EXTERNAL /
  • Downgraded the IDE ATA/ATAPI Controller drivers to the MS Built-in (2006).
  • After restoration, I discovered that Windows Update refused to fetch any updates, even though the corresponding service appeared to be running without any trouble.

Where is your assistance here? Now , all is gone … thank you one more time… Hvala, Sasa Reply nycebo says: 2012/10/23 at 12:13 pm You are a lifesaver. When I ran the EXE file locally,I got the expected menu asking for permission to update to SP1, then the first file,followed by an error message saying ‘catastrophic failure’. This will normally result in a non running update service and search is slow.

Will reply experience again, Tubebend PS: Meanwhile I think afresh Vistainstallation would have beenmore convenient in this case... Sp47845 Dell also offers a Scriptable Staging Edition of the PAT tool, which is license based and suitable for those customers requiring additional staging functionality. Both Windows 7 and Windows Vista detect Advanced Format drives out of the box. i saw that it was using the iastor.sys driver, (and it wouldn't take the newer one that the author linked to) so instead I told it to try the 2006-era microsoft

Email Reset Password Cancel Need to recover your Spiceworks IT Desktop password? Yes, on the taskbar you will have an additonal icon of the Intel Rapid Storage Technology control which seems like a fair trade to using the more up to date AF Once I'd got into the brand spanking new Windows install, I tried running Windows Update - well, it reported that Windows Update wasn't running. Intel RST storage driver cannot be used in "ATA mode" SATA Configuration mode, Intel RST driver can be loaded only in RAID and AHCI SATA Configuration modes.


Seems I couldn't find one that works for me. Toggle the RAID mode in System BIOS while installing the Operating system. Windows Update Not Working After Cloning Hard Drive Check also Windows Update Service is running. Intel Rapid Storage Driver Windows Update was broken (and it would prove to be an Intel problem, not Clonezilla but remember that this was my first time trying Clonezilla so I couldn't rule it out

Back to Top Will an Image That was Built on a Legacy (512) Drive Work on an AF (512e) Drive Imaged From Dell’s Factory? news Rebooted. Unfortunately, the Intel device driver (Intel MSM bundled with the Windows 7 Installation CD may get confused by the Advanced Format. In the 1TB drive, install Intel RST 11.2 SATA driver. 4. Intel Rapid Storage Technology

A flyer is being inserted into the shipping boxes of new Enterprise Client systems that are capable of having an AF drive (Figure 3). Deutschland Länderauswahl Afghanistan Ägypten Albanien Algerien Amerikanische Jungferninseln Angola Anguilla Antigua und Barbuda Äquatorialguinea Argentinien Armenien Aruba Aserbaidschan Asien/Pazifik Äthiopien Australien Bahamas Bahrain Bangladesch Barbados Belgien Belize Benin Bermuda Bhutan Bolivien Not a member? http://gagc.net/hard-drive/can-t-format-the-hard-drive.php Reply ArtFD says: 2011/10/14 at 5:41 pm SP1 successfully installed itself after 45 minutes of running.

My System Specs OS Windows 7 Commando303 View Public Profile Find More Posts by Commando303 . 15 May 2013 #2 TVeblen Windows 7 64 Bit Home Premium SP1 6,372 posts But as described above, the installation of the newer "Intel Rapid Storage driver" (IRST) failed with the message "System does not meet the minimum requirements". Hopefully, my experience and how I resolved it, can help you avoid a lot of pain.

The intel update worked for my T400!!!

I also tried version and got the same error. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. I really like the laptop in question--very nice large screen for tired eyes like mine!!! Ran fine except for Windows Update.

What a shame. In the 1TB Vista clone, I installed the Intel Matrix Storage Manager (MSM) Driver 8.8 from the Lenovo Support site (the most recent SATA driver Lenovo lists for the SL500) and Note that the driver is only supposed to work with desktop boards, but worked fine with my laptop. check my blog Western Digital http://support.wdc.com/product/download.asp?groupid=805&lang=en Conclusion I spent a great deal of time troubleshooting a computer that had this very issue.

old to new.. For more information visit the Microsoft Support article: An update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with Advanced Format Disks . If the image is built on a 512B, Ghost command line switch {-align=1MB} can be used to ensure alignment when deployed to any drive.DISKPART may be used to enable storage configuration I have this question too 0 Kudos Reply richk Community Moderator Posts: 4,815 Registered: ‎01-01-2010 Location: US Message 2 of 7 (1,367 Views) Re: Problem Upgrading W500 to 4K Advanced Format

I used the WD free version of Acronis to clone the drive, which seems to have worked just fine, minus the Search & Update issues. Alternatively, type MSINFO32 in Command Prompt, once in System Information, click Component, then Storage and finally Disk, to look for the number of partition Starting Offset; then divide it by 4096. Thanks for your help. I know it's been years since you found the fix for this, and I am so happy you did!

Use e.