Home > Hard Drive > Purchased New 2 TB Hard Drive-Can't Get It To Install "wrong" NFTS?

Purchased New 2 TB Hard Drive-Can't Get It To Install "wrong" NFTS?


If I reboot and check the BIOS it shows a secondary drive as "unknown device" … is that the same as not recognizing it at all? I was able to retrieve all data from the WinXP slave drive using Win98 as the master. Thank you in advance!

Fik on February 10, 2008 7:47 pm HarshReality: Make sure that you put affhdd.sys into C:\Windows\System32 Also, the operating system has to be 32-bit only. What should i do? navigate here

Windows Vista does not have any issue with big drives. Before, windows would not recognize the hard drive and I couldn't access its files. Performance: The product functions very smoothly. Free up your phone’s memory by off-loading your files to your drive and you can access them anywhere in a single organized library on the Lyve mobile and desktop apps. http://www.sevenforums.com/general-discussion/152601-purchased-new-2-tb-hard-drive-cant-get-install-wrong-nfts.html

Disk Management Windows 10

It would get a few minutes into the scan, then the drive would "unmount" and the program would freeze, I tried this several times. So my conclusion is some sort of hardware failure - mechanical, electrical or otherwise. I found that I had to attach the slave drive to the middle multi-pin connector rather than the end one in order for the computer to boot up normally. This solution was the FIRST RESPONSE, so your just spewing the same answer again!4) READ THE POST BEFORE YOU MAKE A ANSWER!

Reply Mark George says: 2014-May-14 at 4:53 pm Calvin, I have a CCTV video recorder that is running Windows XP 32bit. Consult with manufacturer's instructions and set jumpers to the proper position. 2. What a joke and what a waste of time. Recuva Thanks.

paravioneJul 18, 2013, 6:12 PM didn't know the smaller ones don't need the ext power! Hard Drive Recovery peter July 3, 2008 2:32 pm Reply # thanks jacqui. Thanks. http://blog.atola.com/restoring-factory-hard-drive-capacity/ I am trying to partition the drive as two separate 2Tb drives but when I do this the hard drive is no longer recognized by Windows.

My gut has been telling me all along this was just some sort of corruption with the drive and not hardware related, so I'm going to see if my gut is Western Digital Then Boom you have you 16TB drive all in one place like you wanted. This way the OS sees two seperate logical disks - one partitioned as MBR for the OS boot, the other converted to GPT for a larger data disk. Robin_Alexander 2015-12-04 20:57:12 UTC #29 I have the same operating system (El Capitan 11.10.1) and Finder won't recognize the My Passport for Mac that I just bought.

  • Volume Sets are create by the RAID controller and reside on top of RAID Sets.
  • Please advise.
  • After the clone the disk showed as a 32Mb Drive.
  • Its a good build but fragile, I haven't dropped it yet but can't say it can survive a long drop.

Hard Drive Recovery

But really, the best option now, is to switch to a modern operating system. http://www.tomshardware.com/forum/261014-32-repair-transplanting-platter-drive-model What we had here was a problem, I live in a very remote part of Honduras Central America and would have to drive hundreds of miles through rivers, jungle, and sprend Disk Management Windows 10 I got a 4TB harddisk, okay. Partition Magic However the system still could not see the 1 TB drive and I get similar behavior trying to use it with other PCs.I'm not sure if it's possible for malware or

Ask a new question Read More Western Digital Storage Port External Hard Drive Related Resources solved WD Elements 1TB External Hard Drive Not Working As It Should solved WD 1tb external check over here Good Luck Dave michael/Mark June 24, 2008 10:58 pm Reply # Dart XP worked great and recovered all of my files!!!!! Please help me recover my hard drive! Unrein question - the built in array controller in the msa doesn't support logical volumes over 2TB. Testdisk

I hope it will work for your guys/gals.Here is the link:https://technet.microsoft.com/en-us/magazine/dd637756.aspxGood luck!PS: I tried both commands, but the 2nd command worked for me:To find and repair errors that are found in Step 2: Let’s take a look at the back of the computer and see that we need to unscrew and do in order to get the case open. Anyway the load went perfectly even rebooting okay. http://gagc.net/hard-drive/step-by-step-install-of-backup-hard-drive.php Internal cables are ATA/IDE.

Tom TancrediJul 12, 2013, 6:52 PM Yep only other thing you can do is get another USB 3 connector cable and see if that will resolve it or not , but Seagate This is causing a few problems with the Windows 7 backup feature... I'll probably return it and go with another brand.

He did not even need to explain how to use it as it gave the reader a chance to do another search and learn the application.

Is this correct? The fact that your laptop sees the drive means that you can use data recovery software to recover the files, even though Windows want to format the drive. Thanks in advance for your help! External Hard Drive You should be able to boot into Windows now and attempt recovery.

If possible please answer separately for internal and external HDs if the answer is different for them. 4. DTI Data Recovery September 29, 2008 9:30 am Reply # Dan, You are going to have to remove the hard drive from the laptop. There will be screws holding the board to the HDD chassis, and there certainly will be delicate connections between them. weblink Type "diskpart" and hit ENTER Type "list disk" and hit ENTER Type "select disk X" and hit ENTER – (Where X is the number of the disk unit bigger than 2TB)

Most require that you have an empty spare HDD installed so that any files you recover can be copied to the good HDD. About Me About This Website Resume Timeline Cars Acura Integra Infiniti G35 6MT Sedan Porsche Boxster Porsche Boxster Audio Upgrade Porsche Boxster Repairs Porsche Boxster Upgrades Contact Gear Home Theater Equipment I visited many forums, even went out to get a USB Port as some people advised this worked. While hardware raids are faster, a failure of the controller card means searching for a new one, and controller chips change very often.

All of those topics are mentioned and each would warrant a unique post to even start to explore them. I have done that and rebooted. What else do I need to be able to get into the drive. Install the free Seagate Mobile Backup app on an iOS or Android mobile device to back up all of the pictures and videos from the device to your external drive or

says: 2013-March-20 at 11:22 pm DISKS BIGGER THAN 2TB WITH UNIQUE PARTITION, FORMATTED AND WORKING SOLVED (UPDATED) To get partitions over 2TB formatted and working in windows 8/7 Go to the Once you can access the hard drive there are several software options that you can use to actually restore files. Although the BIOS screen "screamed" it was 10248 megs (which I knew was NOT true). Linda, What OS are you running?

And the Hitachi tool didn't allow med to go above the factory default.

Roger on May 3, 2008 8:58 am Any chance releasing this tool on a self-boot iso image? The 2TB limit isnt in windows, its the use of MBR partitions by 32bit Windows which causes the restriction. It stopped mounting after I used it for a few days with El Capitan. JMC April 2, 2008 1:53 pm Reply # Question… I've got a corrupt hard drive.

When run, a messagebox comes up saying "Error accessing device" and then another one with "Cannot change Visible in OnShow or OnHide." Then the program starts up, but all main windows My undying gratitude, Dmitry…If I were going to have kids, I'd name one after you…maybe two.

fluxtatic on December 5, 2007 10:05 am whit this tool can i fixed my It won't harm the data since it does not access the "user data area" at all. The problem now is, the whole system hang's up!!!

If you experience read errors or noises such as clicking stop what your doing and contact a professional. This normally wasn't enough to cause any problems, but I heard of people trying to create malicious programs that would make this "knocking" happen in an endless loop, to try to The computer died and I am trying to install the hard drive on a different computer.