Boot from a Windows 7 System Repair Disc, and you'll find tools to heal an unbootable PC. In these cases, having the drive unplugged upon booting would be the only option to stop it from hanging the system on boot.Hopefully, in your case, changing the BIOS setting will Goodwin March 20, 2012 5:58 PM I have a similar problem where my boot hangs until my machine stops searching for something on one of my (data only) external drives (as My concern is that the Iomega drive contains my pre-7 drive image, my second one is on the Maxtor drive, and I do not trust the Maxtor drive. navigate here
Reversed polarity 3 replies Hi, I accidently reversed polarity on Asus X301. only in my case my computer would not load if the printer was on. I don't understand everything. But let's assume that the CD boots. http://www.howtogeek.com/forum/topic/external-hard-drive-prevents-boot-up
Am pr solved Windows 7 won't detect usb memory sticks or external hard drives solved Can't Boot With External Hard Drive Plugged In solved I recently plugged a Seagate SA:NA7N678W external PS I don't really know what the "USB Legacy Support" is/does (perhaps a more educated member could tell us?) but as my already was in "Auto" which is a sort of I believe the partition is for about 40gb.Every time I try to "Extend Volume" on the partition, I get a message saying it can't do it. The items displayed are dynamically updated according to the removable devices connected. ________________ When the External drive is plugged in, it tries and fails to boot from it, but can't go
In search box, type disk management, it will bring you to list of disks connected to the computer. It delays booting in to Windows for a few seconds, but if ever I'm in a situation requiring me to recover data, I can boot to an external USB drive and Is There a Way Around This Issue?I would tend to jump to the conclusion that there must be a firmware upgrade for the drive that solves this particularly annoying issue. Disable Usb Legacy Support The boot order in the example above is: floppy, hard disk, CD, USB.
I can't open it right now so I can't give exact names. Why Won't My Pc Boot Up With A Usb Device Plugged In Change the Boot Order The computer may be set to prioritize booting from USB devices over internal hard drives which can cause the system to hang when you turn it on. I can't change or delete them. Try to boot from that.
I should also mention that I can leave the Maxtor connected and Windows will start up perfectly from a complete shutdown. Booting From External Hard Drive Windows 7 Checked Boot Device Priority sequence and made sure to have HDD #1, CD-Rom #2, etc. Make sure to move USB-HDD or USB all the way to the bottom. Thanks for your patience, my friend.
That is what I have been doing all along. Make sure the hard drive is first in boot order, save, then try again. 0 Cooke14 8 Years Ago I have the same problem mine is a lacie 750gb and I Unable To Boot Windows With External Hard Drive Attached so the only option i see fit is now going through all windows updates and removing them 1 by 1 or finding out which updates where related to usb drives and Windows Ses Driver Irv Reports: · Posted 7 years ago Top keno54 Posts: 8 This post has been reported.
You may already have the DVD. check over here At this point, I am simply disconnecting the Iomega after shutdown and reconnecting after Windows is fully loaded. Flag Permalink Reply This was helpful (0) Collapse - BINGO by R. As soon as I completely shut down, Iomega slams the computer and Windows will not open. Western Digital Technologies Wd Ses Device Update
Do you know if there is any way to find the capacity of the BIOS? Windows starts up perfectly. I toiled with the same problem all day yesterday and found the solution on this thread: http://social.answers.microsof.....38676e0880 For me it was disabling USB legacy support in the bios that worked. his comment is here You can then make new partition, it will then format the drive and finish.
I changed the setting from "Smart Auto" to "Auto". Windows 10 Won't Boot With External Hard Drive Connected After finding the Iomega FAQ, I dug around the internet and found multiple discussions that indicated that the Dell bios's had an internal limitation of 137 gigs as the maximum size As you can see, I'm grasping at straws here.
If it does not pass the USB device scan, then you may have the same problem I had. Tweet Like Google+ Leave a Reply Cancel reply Your email address will not be published. But the one thing that really makes me question that is that my computer came from Dell with an internal 250 gig hard drive. Windows 10 Won't Boot With Usb Plugged In Question?
So I did arrange the order as you suggested - removable is disabled, CD Rom is 1st, Hard Drive is 2nd (but there is no way to provide that C: is The program shows you what drivers were running at the time of the crash, and highlights the likeliest suspects. Of course once those drives sizes were surpassed, a BIOS change was required. weblink This is the message I get when I boot with the external hard drive plugged in:"Reboot and Select proper Boot deviceor Insert Boot Media in Selected Boot Device and press a
With the Iomega connected, it gets past the Dell screen (which gives me the F2 setup and F12 Boot Menu screens), and puts the "Starting Windows" screen, but it never gets As mentioned above, you can typically alter the order in which the BIOS checks for devices from which to boot. I did not see a choice disabling USB boot choices, but I once again point out the the Maxtor stays connected and does not cause a boot problem. Once Windows is up and running, I can re-connect the Iomega and use it and the information on it with no problem.
Reports: · Posted 7 years ago Top keno54 Posts: 8 This post has been reported. Now that's bad enough but at just weeks into owning this model it went to their service center and came back. My name is Aseem Kishore and I work as a Systems Analyst in Dallas, TX. Irv S.
m 0 nick111 5 Years Ago I had the same problem, with external harddrive freezing the machine during boot up. That message pretty much confirms what i thought, your PC thinks it's a boot disk and tries to boot from it, puzzled why it's ignoring the boot order though. Reports: · Posted 7 years ago Top keno54 Posts: 8 This post has been reported. I have installed windows 7 on a desktop and a 120 gig hard drive in a usb 20 external case, on the first plug in it detected t solved New PC,
It is connected to a USB 3.0 port! Check the BIOS and see if USB (if it is that) or it is enabled as a SATA boot drive (check the boot order). If the sick drive is the one you use to boot Windows, you'll have to remove it from the PC and access it on another computer. HP's non-commitment to warranty issues means they are not a company we can buy from.Your choice to see if HP can resolve this for you but if I was to do
You better believe I lost a lot of hair and cussed a lot while troubleshooting this one, back when I first got the computer. KiarkJul 6, 2014, 6:16 AM Joey2oo9 said: It's a shame we never got it figured out... But at last I found a solution that works, and it's simple (thank you to saykomatrixx): First (of course) you check your BIOS to see that USB-devices are below (after) internal In general, when your computer boots, there's a key that you need to press right away that causes the BIOS to enter its configuration mode instead of booting Windows.