W7 after Vista and on a separate partition / drive = Yes it should be that simple. The system then booted to XP with all my original programs in tact and with access to 320gb HD. I noted that during the repair install, my SSD was renamed from C to H - I'm guessing something went wrong with the MBR during the attempted install of Windows 8....but The problem with the metro boot loader is that if you have Windows 8 or later as the default OS, it boots into Windows 8 first to display the metro boot http://gagc.net/dual-boot/vista-windows-7-dual-boot-bootloader.php
Windows could not start because of a computer disk hardware configureation problem. Windows 8 boot manager installed to first disk active partition. (replacing Windows 7 bootmgr on SSD) Two entries in the system BCD - one for W7 second for W8. I run 7 systems (3 Windows, 4 Linux) on the same box (not all at the same time) and I do not have to reboot when I want to bring up Either in BIOS or in Windows settings.
However, this may not always be necessary -- installing Windows 7 after Windows 8 or 8.1 seems to work. But once both OS are installed on their respective hard drives, how do I simply pull one of the drives out and continue with a single OS (without the dual boot Image Credit: Mack Male on Flickr JOIN THE DISCUSSION (13 REPLIES) April 18, 2015 Brent This might be problematic with either older hardware and newer Windows versions or newer hardware and I have Windows 7 (64 bit) ALREADY installed on a SINGLE hard drive. 2.
Edited by opapazis, 21 September 2013 - 08:00 PM. Continuing with the steps.7-Reload personal data on 320gb HD.8-connect the original 320gb sata cable to the 80gb HD9-connect a power cable to the 80gb HDI then let the computer boot with and a clean new 500 GB hard drive to install exp on. Windows 10 Dual Boot Xp See the setup log file for more information" I backed out one step, selected to delete the partition, and then recreated it again, and then once more selected the HDD for
I followed the same instructions posted on the sevenforums, but this time I've run into some issues. So, although I COULD dual boot, I actually never need to, unless I want to add another program to the XP Operating System's partition. Tech Reviews Tech News Tech How To Best Tech Reviews Tech Buying Advice Laptop Reviews PC Reviews Printer Reviews Smartphone Reviews Tablet Reviews Wearables Reviews Storage Reviews Antivirus Reviews Latest Deals This comes after you hit the install button.
I have triple boot XP, Vista and now Windows 7 pro 64. Dual Boot Software NickMApr 29, 2013, 9:16 PM RetiredChief said: Why do you have to go into Bios to change boot order.I have XP and Vista on two pair of raid0 HDDs. (also had If you install the oldest OS first, it's a much easier affair. I needed XP for some applications, so I purchased a 2nd hard-drive and loaded it with XP.
on sda6 if you setup sda5 for swap8. That helped me boot the non-Dell drive, and to make all necessary setting changes in Windows for RAID. Dual Boot Windows 7 And Xp Windows 7 Installed First It said according to help to use Bcdedit on the command line, which there is no command line to select, unless you know where this is located.Have you tried to do Dual Boot Two Hard Drives Windows 7 Finally disconnected my Vista hard drive and did a clean install of XP.
Windows 8 on an HDD Currently, my Windows 7 installation resides on my SSD (C). useful reference I see some folk have reported success here, so I'm not sure what I am missing: How did you setup your Win 8 install? Windows 7 would not let me install Pagemaker. Browser Comodo Dragon Antivirus MSE & Malwarebytes Quote 29 Dec 2011 #2 Ivan the SoSo View Profile View Forum Posts Senior Member Posts : 1,396 Windows 8 Developer 32 bit When Dual Boot Windows 7 And Xp Separate Hard Drives
The XP drive died.My question was "HOW" do a create a dual boot even if I have XP installed first?I have all my user files stored on the Win7 Hard drive Partially eject the one you're not booting into, but leave it sitting in the bay to minimize risk of damaging the drive through excessive handling. After install I will add another drive and install then. http://gagc.net/dual-boot/vista-bootloader-restored-but-still-no-dual-boot-screen.php This exercise scared the crap out of me, especially when the drive letters changed, but I do want to install Windows 8 outside of a virtual environment (e.g.
BatlanOct 1, 2013, 12:15 PM I have a similar situation but with some differences. How To Install Multiple Operating Systems On One Computer Then, tried to "repair" the boot record for Vista (following the instructions above). I am installing xp now.
Only connect both drives after both OS's have been installed. I need to be able to chose which os to run but currently I can only do so by pressing F12. I'm also concerned one of the ports may be bad (SATA1) but I am unsure how to determine that. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Vista uses a new boot loader, which will be overwritten if another OS is installed afterwards.
And once Win10 is installed on the 2nd drive, it will reportedly place the boot loader on both discs to enable me to pick the desired OS at boot-up. You will still screw up the Win7 boot partition and have to to the repair and the add of XP to the Win7 startup.Even though your installation partition is on a Then, when installing win7, make sure the XP disk isn't connected to the motherboard. get redirected here The only fix for this is a registry tweak so that Windows XP can’t see the Windows 7 drive.Have you considered using the virtual Windows XP on Windows 7 it is
drive. To make a dual boot system on two disks simply install Windows XP first and then Windows 7. On Windows 8 and newer versions of Windows, it's a blue screen with tiles with the title "Choose an operating system." On Windows 7, it's a black screen with a list A recent hardware or software change might be the cause.
Windows 7 Help Forums Windows 7 help and support Installation & Setup » User Name Remember Me? one using Vista already installed, and one newly installed empty 500gb drive, or alternately inform me that it just cannot be done and the only way to do it is to Might add, just to be safe, I also made Norton GHOST Images of both "C" drive and "D" drive, so in the event that either gets screwed up, I can restore System Manufacturer/Model Number Acer Notebook OS XP, Win7, Win8_Eval CPU Intel Quote 30 Dec 2011 #8 Golden View Profile View Forum Posts EightForums Pasta Posts : 231 Windows 8.1 x64 OK,
Basically, this involves booting the existing Windows system on your computer and opening the Disk Management tool. (Do this by pressing Windows Key + R, typing diskmgmt.msc into the Run dialog, and japentzApr 29, 2011, 4:17 AM also, it does say I need to use 3rd party software to accomplish this. It solved all the problems I had with XP Pro 32 bit on my hardware. p.s I was surprised how quick the installation was, thought it would take much longer.
WyomingKnottApr 29, 2011, 9:04 AM RetiredChief said: Why do you have to go into Bios to change boot order.I have XP and Vista on two pair of raid0 HDDs. (also had I will sometime get the same thing for ntoskrnl.exe. by mach2race / May 29, 2008 4:43 AM PDT In reply to: Have both connected in the future... I built the system myself and I believe just booted the XP disk and did partition and format.I apologize for my ignorance but I must ask why the following was at
The windows 7 install will take care of the boot loader.You can also do like others have said and install XP on one drive, win 7 on the other and use Maybe it was because I had an on board sound and the device driver didn't take too well in sharing itself between 2 OS's. If this is not easier than setting up a virtual machine - which I have found to be a bitch, then I am a particle of flour dust landing on a